|
 |
|
|
 |
Rigid Meehanite casting, Heavy square (box) ways design on all axis, Four slide way design on base, Hardened & Ground square (box) ways on all axis, High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, 8000rpm spindle speed. |
| Item Model |
M218 |
Item Model |
M218 |
| Table size |
830x405mm
(32.6"x16") |
Ball-screw diameter |
 32mm (1.26") |
| Table T-slot (WxN) |
18mm (0.71")x4 |
Pitch of ball-screw X,Y/Z |
8mm/6mm
(Z : 8 is opt.) |
| Max. table load (Center) |
350kgs (770lbs) |
X & Y axis rapid feed |
16M (640ipm) / min |
| X travel |
660mm (26") |
Z axis rapid feed |
12M (480ipm) / min |
| Y travel |
510mm (20") |
Cutting feed |
6M (240ipm) / min |
| Z travel |
610mm (24") |
ATC type |
Armless type
(Arm type is opt.) |
| Spindle nose to table surface |
120~730mm (4.7"~28.7") |
Tool storage capacity |
16 tools |
| Spindle center to column |
550mm(21.7") |
Max. tool diameter |
90mm (3.5") |
| Table surface to floor |
840mm (33.1") |
Max. tool weight |
7kgs (15lbs) |
| Spindle speed #40 |
8,000RPM
(Opt. 10,000rpm) |
Positioning accuracy |
 0.005mm (0.0002") |
| Spindle speed #50 |
- |
Repeatability accuracy |
0.003mm (0.0001") |
| Spindle motor |
10HP |
Coolant pump |
0.5HP |
| Spindle taper |
CAT or BT #40 |
Machine weight (Approx) |
3,350kgs (7,370lbs) |
| Spindle pulling force |
#40:850kgs 10% |
Dimension |
2,220x2,100x2,490mm
(87"x83"x98.5") |
| Spindle belt |
8YU belt |
|
|
|
|
|
