|
 |
|
|
 |
Rigid Meehanite casting, Heavy square (box) ways design on all axis, Four slide way design on base, Hardened & Ground square (box) ways on all axis, High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, 8000rpm spindle speed. |
| Item Model |
M526 |
Item Model |
M526 |
| Table size |
1,520x612mm
(60"x24") |
Ball-screw diameter |
 40mm (1.57") |
| Table T-slot (WxN) |
18mm (0.71")x5 |
Pitch of ball-screw X,Y/Z |
8mm/6mm
(Z:8mm is opt.) |
| Max. table load (Center) |
1,000kgs (2,200lbs) |
X & Y axis rapid feed |
16M (640ipm) / min |
| X travel |
1,320mm (52") |
Z axis rapid feed |
12M (480ipm) / min |
| Y travel |
660mm (26") |
Cutting feed |
6M (240ipm) / min |
| Z travel |
700mm (27.5") |
ATC type |
Armless type (Arm type
is opt.) |
Arm type |
| Spindle nose to table surface |
124~824mm (4.9"~32.4") |
Tool storage capacity |
24 tools |
| Spindle center to column |
700mm (27.6") |
Max. tool diameter |
90mm
(3.5") |
125mm (4.9") |
| Table surface to floor |
865mm (34.1") |
Max. tool weight |
7kgs (15lbs) |
15kgs (33lbs) |
| Spindle speed #40 |
8,000RPM
(Opt. 10,000rpm) |
Positioning accuracy |
 0.005mm (0.0002") |
| Spindle speed #50 |
6,000RPM
(Opt. 8,000rpm) |
Repeatability accuracy |
0.003mm (0.0001") |
| Spindle motor |
20HP |
25HP |
Coolant pump |
0.61HP |
| Spindle taper |
CAT or BT #40 |
CAT or BT #50 |
Machine weight (Approx) |
7,700kgs (16,940lbs) |
| Spindle pulling force |
#50:1,800kgs 10% |
Dimension |
3,680x2,860x2,565mm
(145"x113"x101") |
| Spindle belt |
8YU belt |
|
|
|
|
|
