 |
Rigid Meehanite casting, Heavy square (box) ways design on all axis, Four slide way design on base, Hardened & Ground square (box) ways on all axis, High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, Direct drive design on spindle for 15000rpm spindle speed. |
| Item Model |
HM3 |
Item Model |
HM3 |
| Table size
| 930 x 460 mm
(36.5" x 18") |
Z axis rapid feed
| 12M(480ipm)/min |
| Table T-slot (WxN)
| 18mm(0.71")X4 |
Cutting feed
| 6M(240ipm)/min |
| Max. table load (Center)
| 380kgs(836lbs) |
ATC type
| Armless type
(Arm
type is opt.) |
| X travel
| 860 mm (34") |
Tool storage capacity
| 16 tools |
| Y travel
| 510 mm (20") |
Max. tool diameter
|  90 mm (3.54") |
| Z travel
| 610 mm (24") |
Max. tool weight
| 7 kgs (15 lbs) |
| Spindle nose to table
| 116~726 mm (4.6"~28.6") |
Positioning accuracy
|  0.005 mm (0.0002") |
| Spindle center to column
| 550 mm (21.7") |
Repeatability accuracy
| 0.003 mm (0.0001") |
| Table surface to floor
| 870 mm (34.3") |
Coolant pump
| 0.5HP |
| Spindle speed
| 15,000 RPM |
Machine weight (Approx)
| 4,550 kgs (10,010 lbs) |
| Spindle motor
| 15 HP |
Dimension (L)
| 2,680 mm (106") |
| Spindle pulling force
| 700kgs 10% |
Dimension (W)
| 2,370 mm (93") |
| Ball-screw diameter
| 32 mm (1.26") |
Dimension (H)
| 2,705 mm (106.5") |
| Pitch of ball-screw X/Y/Z
| 8mm/8mm/6mm |
|
|
| X & Y axis rapid feed
| 20M(800ipm)/min |
|
|
|
