|
 |
|
|
 |
Rigid Meehanite casting, Heavy square (box) ways design on Z axis, Linear guide way design on base & saddle for quickly table movement,High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, Direct drive design on spindle for 15000rpm spindle speed. |
| Item Model |
HL4 |
Item Model |
HL4 |
| Table size
| 1,260 x 510 mm
(49.5" x
20") |
Z axis rapid feed
| 16M(640ipm)/min |
| Table T-slot (WxN)
| 18 mm (0.71") x5 |
Cutting feed
| 10M(400ipm)/min |
| Max. table load (Center)
| 520 kgs (1,144 lbs) |
ATC type
| Armless type
(Arm
type is opt.) |
| X travel
| 1,060 mm (42") |
Tool storage capacity
| 20 tools |
| Y travel
| 610 mm (24") |
Max. tool diameter
|  90 mm (3.54") |
| Z travel
| 700 mm (27.5") |
Max. tool weight
| 7 kgs (15 lbs) |
| Spindle nose to table
| 122~822 mm (4.8"~32.4") |
Positioning accuracy
|  0.005 mm (0.0002") |
| Spindle center to column
| 650 mm (25.6") |
Repeatability accuracy
| 0.003mm(0.0001") |
| Table surface to floor
| 860 mm (33.8") |
Coolant pump
| 0.5HP |
| Spindle speed
| 15,000 RPM |
Machine weight (Approx)
| 5,900 kgs (12,980 lbs) |
| Spindle motor
| 15 HP |
Dimension (L)
| 3,180 mm (125") |
| Spindle pulling force
| 1000kgs 10 % |
Dimension (W)
| 2,465 mm (97") |
| Ball-screw diameter
| 40 mm (1.57") |
Dimension (H)
| 2,770 mm (109") |
| Pitch of ball-screw X/Y/Z
| 12mm/12mm/6mm
(Z: 12mm is opt.) |
|
|
| X & Y axis rapid feed
| 30M(1,200ipm)/min |
|
|
|
|
|
