|
 |
|
|
 |
Rigid Meehanite casting, Heavy square (box) ways design on Z axis, Linear guide way design on base & saddle for quickly table movement,High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, 8000rpm spindle speed. |
| Item Model |
L526 |
Item Model |
L526 |
| Table size |
1,520x612mm
(60"x24") |
Ball-screw diameter |
 40mm(1.57") |
| Table T-slot (WxN) |
18mm (0.71")x5 |
Pitch of ball-screw X,Y/Z |
12mm/8mm
(Z: 8mm is opt.) |
| Max. table load (Center) |
800kgs (1,760lbs) |
X & Y axis rapid feed |
24M(960ipm) / min |
| X travel |
1,320mm (52") |
Z axis rapid feed |
12M(480ipm) / min |
| Y travel |
660mm (26") |
Cutting feed |
10M(400ipm) / min |
| Z travel |
700mm (27.5") |
ATC type |
Arm type |
| Spindle nose to table surface |
120~820mm (4.7"~32.3") |
Tool storage capacity |
24 tools |
| Spindle center to column |
700mm(27.56") |
Max. tool diameter |
90mm (3.5") |
| Table surface to floor |
870mm (34.3") |
Max. tool weight |
7kgs
(15lbs) |
15kgs
(33lbs) |
| Spindle speed #40 |
8,000RPM
(Opt. 10,000rpm) |
Positioning accuracy |
 0.005mm (0.0002") |
| Spindle speed #50 |
6,000RPM
(Opt. 8,000rpm) |
Repeatability accuracy |
0.003mm (0.0001") |
| Spindle motor |
20HP |
25HP |
Coolant pump |
0.61HP |
| Spindle taper |
#40 |
#50 |
Machine weight (Approx) |
7,700kgs (16,940lbs) |
| Spindle pulling force |
#50:1,800kgs 10% |
Dimension |
3,680x3,000x2,540mm
(145"x118"x100") |
| Spindle belt |
8YU belt |
|
|
|
|
|
